Deep Groove Ball Bearing

  • Single Row Deep Groove Ball Bearing

    Single-row ball bearings with oblique joint are non-demountable. They are manufactured in multiple series. They are characteristic with low friction, high rigidity and silent run. The bearings are suitable for high rpm.
    Single-row ball bearings with oblique joint have the bearing ring orbits designed so that the joins of their points of interface with balls contain acute angle – the so-called contact angle – with the perpendicular on the bearing axis. These bearings can transmit radial and axial forces simultaneously. Axial forces are only transmitted in one direction. Thrust duty increases with growing contact angle. Through suitable arrangement of a couple of bearings, dual axial load-carrying capacity can be achieved.
    The bearings are manufactured with normal accuracy, for seating more demanding in terms of accuracy, or seating with higher rpm frequency, bearings with higher running accuracy are used.

  • Double Row Deep Groove Ball Bearing

    Double row deep groove ball bearings are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62 and 63 series, but have a considerably higher load carrying capacity.